Flite Test Simple Cub

A kit to build the Flite Test Mighty Simple Cub Airframe.
Availability: In stock (1)

The Simple Cub is both easy to build and easy to fly. In its most simple format, 11 separate pieces of foam is all that is required to build this plane. This makes for a build time under 2 hours. The ability for the FT Simple cub to go from 3 channel (rudder, elevator, and throttle) to 4 channel (rudder, elevator, aileron, and throttle) without building a new wing. The aileron mod only takes 15 minutes to add and opens a world of options like flaperons and aerobatic flying. If dropping foam bombs for target practice is your fancy, the same servo will double as drop mechanisms while still keeping the great flight characteristics as the original 3 channel format. Use the Flite Test Power Pack B to get up and flying in no time.

Specifications:
Weight: 10 Oz (Fully assembled; without battery)
Wingspan: 38 Inches (956mm)
Center of Gravity: 1.75 Inches (45mm) from the leading edge of the wing (Recommended)
Control Surface Throws: 12-16 Degrees
Expo Suggestions: 30%

Kit Includes:

  • Laser-cut Foam Airframe
  • Firewall
  • Push Rods
  • Control Horns
  • Popsicle Sticks
  • Throw Gauge
  • BarBQ Skewers
  • Velcro
  • Rubber Bands
  • Specification Sheet

Needed to Complete:

  • (1) Brushless Motor: Flite Test B Radial or 370 Size, 1200kV Minimum
  • (1+) Propellers: 8x4.5
  • (1) ESC: 20-30 Amp
  • (1+) Battery: 3S 11.1V LiPo 1300mAh
  • (4) Servos: ~9 Gram Micro Servos
  • (1) 2.75" Wheels (FLT-2054)
  • (1) 2.4GHZ Radio System (Radio & Receiver)
    • Spektrum: DX6e Radio System
    • Futaba: 6J Radio System
  • Misc. Building Supplies.
0 stars based on 0 reviews
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »